Gear

Running Shorts Guide: How I Choose Fit, Liner and Storage

My running shorts guide starts with a loaded waistband, a liner that stays quiet and a hem that clears my stride. I then run with the actual phone, keys and fuel I plan to carry. If the shorts need constant adjustment, ride up when damp or bounce with a phone, a good-looking fit in the mirror has not passed.

Twelve years of running have taught me that shorts are a small gear choice with a long opportunity to annoy me. On a short dry jog, almost anything can feel fine. My real decision comes after the fabric warms, pockets fill and the liner moves through thousands of strides. I choose the pair that disappears while I run, not the one with the longest feature list.

My quick verdict: Pick a waistband that stays level without painful drawcord tension; choose a liner or underwear setup that does not bunch or cut; confirm the leg opening clears knee lift and rearward stride; then test storage with the load you will carry. Inseam length is a starting clue, not a comfort guarantee.

Decide what job the shorts must do

Before I compare cuts, I name the run. An easy half-hour run with a key is different from a hot long run carrying a phone and several gels. A fast race may reward low bulk; a trail day may need secure pockets and better coverage against brush.

My main jobWhat I prioritizeWhat I test first
Short easy runsSimple fit and quick comfortWaist and liner with a key
Workouts and racesUnrestricted stride, low bulkAcceleration, turns and bib position
Long runsStable phone and fuel storageFully loaded waistband after time and sweat
Hot or wet runsFabric behavior and friction controlDamp liner, cling and coverage
TrailsSecure carry and high-step mobilityPocket retention, side steps and snag points

I keep shorts within the larger gear system. My running gear guide helps decide which items actually need to be carried; I do not buy more pockets to solve a load I did not need in the first place.

Start with the waistband, loaded

I put my phone in the intended pocket before judging size. An empty short can sit flat, then fold or sag as soon as that weight pulls on it. I breathe deeply, bend, jog and run a short faster segment. The waistband should stay level without digging into my abdomen.

A drawcord is for fine adjustment. If I must tie it so tightly that the waist puckers or bathroom access becomes difficult, I compare another size or shape. If the cord is loose and the shorts migrate downward, the rise or waistband geometry may be wrong even when the label says my usual size.

I check the rear and side of the waistband in a mirror after moving. A phone that starts centered but rotates sideways or bounces vertically has failed the carry test. I would rather use a stable running belt than force an overloaded short to do both jobs poorly.

Choose the liner as part of the whole fit

Brief liners use less fabric and can feel airy, but their edges must not cut into the groin or shift as I run. Boxer-style liners give more thigh coverage, which may help some runners with friction, but a loose or tight hem can roll into a new hot spot. Linerless shorts let me choose separate underwear; then I test both waistbands and seam placements together.

Liner setupWhy I consider itMy failure sign
Brief linerMinimal fabric and simple layeringEdge cuts, rides or leaves unwanted exposure
Boxer-style linerMore thigh coverage and supportLeg hem rolls or bunches
Linerless plus underwearMore control over support and fabricTwo waistbands fight or seams overlap

I never assume “more coverage” equals “no chafing.” Skin contact, sweat, seam placement and movement matter together. I inspect the liner after a run at the point where irritation normally starts. If it has rolled or shifted, changing the outer inseam alone may not solve the cause.

Inseam length is not the same as real coverage

The number printed for inseam length tells me only part of the story. Rise, side split, leg opening and pattern shape determine how the short sits while the knee lifts and the leg extends behind me. Two pairs with the same listed length can expose and move very differently.

I raise my knee, take a long step, climb a stair and jog before removing tags. Shorter cuts may feel cooler and free the stride; longer cuts may offer coverage and reduce some thigh contact. Neither is automatically better. If the fabric catches behind the thigh or balloons in wind, I change the cut rather than chase an inseam number.

I also test whether the hem rides high enough to affect modesty or support during a fast stride. The right answer is personal, but I make it during movement, not from a standing product photo.

Fit problems the size label hides

Waist fits, thighs bind: I look for a different leg opening, split or stretch pattern. Sizing up may loosen the waistband without freeing the thigh.

Hips fit, waist gaps: I try a contoured waistband or a modest drawcord adjustment, then check whether the gathered fabric rubs.

Crotch drops while I run: I look at rise, liner tension and pocket load. Repeatedly pulling the shorts up is a failed fit.

Liner rides up: I check hem tension, length and behavior when damp. A longer boxer liner is only useful if it stays in place.

Fabric balloons or clings: I test in wind and with some moisture. On exposed routes, a loose shell can become noisy and unstable; a very thin wet shell can cling or become less opaque than expected.

I use current body measurements and the model’s own size chart, then compare adjacent sizes with identical pocket loads. I do not assume a letter size transfers between brands or cuts.

Phone pockets have to work with the case on

I insert my real phone, in its usual case, into every candidate pocket. I jog, accelerate, turn and sit. A good pocket keeps the phone close to my body, does not rotate or bounce and lets me take it out without dragging the waistband down. I make sure the opening retains it after I remove another item.

Centered rear pockets often keep weight near the body’s midline, but the position alone does not guarantee stability. Side compression pockets can also work when fabric tension and opening size are right. A zipper adds security only if the phone fits without pressing a hard edge into my back or hip.

Sweat can affect the screen or a case, so I consider protection as part of the setup. I do not call a pocket “phone-sized” until my own phone stays secure on a real run.

Separate keys, fuel and sharp edges

I assign keys to a clip or small compartment away from the phone and skin. I count the fuel I will actually carry, then load all of it. Gels may seem light individually, yet several packets can pull a soft waist down and their corners can press against the body.

Before buying more storage, I work out how much fuel the run requires. My fueling-by-duration guide helps make that decision. If the load is too much for shorts, I move it to a belt or, for longer outings needing more water and supplies, a hydration vest that I have tested while running.

I practice retrieving one gel while moving. A pocket that is secure only when full but spills the remaining items after the first packet comes out will fail on race day.

My friction-and-storage field test

The dressing room screens out obvious failures. The decisive test happens in motion with the complete setup:

  1. Load it: I put in my phone, key and the fuel needed for the intended run.
  2. Move through range: I walk, jog, climb stairs, raise a knee, lunge and sit.
  3. Run a short loop: I include easy running, a hill, several relaxed strides and a turn.
  4. Check wet behavior: When possible, I repeat after sweat or a controlled damp test, especially for hot-weather or rainy use.
  5. Inspect immediately: I note waist drift, rolled liner hems, thigh heat, pocket bounce and any change in coverage.

I do not deliberately rub my skin raw to prove a failure. If a hot spot begins, I stop and identify the seam or movement. On the next test I change one variable, such as size, liner type or carrying position, so I can tell what helped.

Fabric, heat and wet cling

I care about how a fabric behaves on my route, not just a “breathable” tag. A light shell may move air well but cling when saturated. A darker or thicker fabric may feel different in heat yet give more consistent coverage. I test the actual garment under the weather in which I will use it.

I also check the liner and waistband after laundering. Elastic that rebounds in a new pair can lose recovery over time. Bonded pockets and seams should stay flat; a lifting edge can turn into a friction source. I follow the care label, avoid leaving wet shorts compressed in a bag and close zippers before washing.

Anti-chafe product can protect a known friction spot for a long or wet run. I still solve a rolling liner, cutting seam or migrating waistband first. Lubricant does not change a poor pattern into a good fit.

Trail, race and bathroom details

For trail use, I check whether pockets retain items during high steps and uneven footing. I think about brush, grit and whether a longer liner collects debris. The route determines the trade. I do not select trail shorts solely from a marketing label.

For a race, I test the exact shorts with bib attachment, fuel, phone and any belt. Pins can damage ultralight material or block a pocket. A bib belt works only when event rules permit it and I have already run in the full arrangement. My race-week checklist is where I freeze the tested kit; expo purchases do not enter the race outfit.

I also make a practical bathroom check at home. A layered waistband or two-in-one short can be awkward when loaded. I want to manage closures and pockets without setting everything on the ground.

Keep, return or reassign

My verdictEvidence
KeepWaist stays level, liner remains quiet, stride is free and pockets hold the planned load
Compare another sizeFit is close but pressure or movement changes with the same load
Compare another cutWaist and thighs need incompatible sizes, or liner/hem geometry keeps failing
Use a belt or vestShorts fit well but cannot carry the necessary items without bounce
ReturnRepeated hot spots, liner rolling, unwanted exposure or constant adjustment

I reassign or retire a pair when the elastic no longer recovers, pockets stop retaining a phone, the liner seam fails or fabric becomes too thin for its intended use. Color fading alone is cosmetic; a waistband that no longer holds is functional failure.

Frequently asked questions

Should running shorts have a liner?

I choose a liner when its support and coverage work for my body. Linerless shorts can work equally well with separate underwear, provided the two waistbands and seams do not fight.

What inseam should I choose?

I start with the coverage I want, then test knee lift, rearward stride and sitting. Rise, split and leg opening can matter more than the labeled inseam.

Should I size up for long runs?

Not automatically. A larger size may drift once pockets are loaded. I compare adjacent sizes with the same phone and fuel, then judge waist pressure and movement after running.

Can longer shorts prevent chafing?

They may reduce direct thigh contact for some runners, but a rolling liner or rough seam can create friction. I test the whole garment when damp and moving.

Where should my phone go?

I choose the pocket that keeps my actual phone and case secure with the least bounce or pressure. If no shorts pocket passes, I use a stable belt instead.

Are two-in-one shorts always better for long runs?

No. They add coverage and storage options, but the inner hem can roll and two layers can trap heat or complicate fit. I test the complete garment at long-run duration.

Ken’s final call

I buy running shorts for a specific job, then make the pair prove itself with the real load and conditions. A steady waistband, quiet liner, free stride and stable pockets matter more than an inseam label or a feature count. If I forget about the shorts while running, they have done their job.

Ken — NextGait Founder

Written by Ken — 12 years of running, 12,500+ miles, 63 shoes tested, 36 races from 5Ks to a 50K ultra. I run 30–40 miles a week on the Atlantic City Boardwalk and review every shoe with real training miles, not one-run demos. More about me →

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top